AT25F512 |
RFQ for AT25F512 Required Field |
 |
| Technical/Catalog Information | AT25F512AN-10SU-2.7 |
| Vendor | Atmel |
| Category | Integrated Circuits (ICs) |
| Memory Type | FLASH |
| Memory Size | 512K (64K x 8) |
| Speed | 20MHz |
| Interface | SPI, 3-Wire Serial |
| Package / Case | 8-SOIC |
| Packaging | Tube |
| Voltage - Supply | 2.7 V ~ 3.6 V |
| Operating Temperature | -40°C ~ 85°C |
| Format - Memory | FLASH |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | AT25F512AN 10SU 2 7 AT25F512AN10SU27 AT25F512AN10SU2 7 ND AT25F512AN10SU27ND AT25F512AN10SU2.7 |
| Product | Manufacturers | Pack | D/C |
| AT25F512 | Atmel | 04+ | 0 |
The AT25F512/1024 provides 524,288/1,048,576 bits of serial reprogrammable Flash memory organized as 65,536/131,072 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT25F512/1024 is available in a space-saving 8-lead JEDEC SOIC package.
The AT25F512/1024 is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO), and Serial Clock (SCK). All write cycles are completely self-timed.
BLOCK WRITE protection for top 1/4, top 1/2 or the entire memory array (1M) or entire memory array (512K) is enabled by programming the status register. Separate write enable and write disable instructions are provided for additional data protection. Hardware data protection is provided via the WP pin to protect against inadvertent write attempts to the status register. The HOLD pin may be used to suspend any serial communication without resetting the serial sequence.
Features |
| • Serial Peripheral Interface (SPI) Compatible• Supports SPI Modes 0 (0,0) and 3 (1,1)• 20 MHz Clock Rate• Byte Mode and 256-byte Page Mode for Program Operations• Sector Architecture: Two Sectors with 32K Bytes Each (512K) Four Sectors with 32K Bytes Each (1M) 128 Pages per Sector• Product Identification Mode• Low-voltage Operation 2.7 (VCC = 2.7V to 3.6V)• Sector Write Protection• Write Protect (WP) Pin and Write Disable Instructions for both Hardware and Software Data Protection• Self-timed Program Cycle (60 s/Byte Typical)• Self-timed Sector Erase Cycle (1 second/Sector Typical)• Single Cycle Reprogramming (Erase and Program) for Status Register• High Reliability Endurance: 10,000 Write Cycles Typical• 8-lead JEDEC SOIC |
Operating Temperature...................... -40°C to +85°C
Storage Temperature ...................... -65°C to +150°C
Voltage on Any Pin
with Respect to Ground ..........................-1.0V to +7.0V
Maximum Operating Voltage ............................... 6.25V
DC Output Current............................................. 5.0 mA
*NOTICE: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
